Datalogic

Instruksjonene for denne skanner-modellen er på engelsk da vi ikke har tilgang til en skanner med norsk språk.

Recommended scanner settings

The following settings should be configured in the device settings of the scanners.

Memor 1 / Joya Touch A6

Find the settings via System > Scanner settings.

1. Settings - Scanner settings - Notification

   1. Good read audio mode: None
   2. Turn this off so there will be no 'good read' feedback when the barcode is not actually inputted into the Tixly Scan App). This will avoid confusion, eg the box employee keeps scanning while the barcode is actually not inputted into the Tixly Scan App.

2. Settings - Scanner settings - Formatting

   1. Label prefix: None
   2. Label suffix: [LF]
   3. Group separator: [GS] 

3. Settings - Scanner settings - Wedge

   1. Enable keyboard wedge: Yes
   2. Keyboard wedge only on focus: No
   3. Keyboard wedge input mode: Key pressure
   4. Enable intent wedge: Yes

4. Settings - Sound & notification

   1. Media volume: Loud
   2. By turning the media volume up, you will hear the feedback sound of the Tixly Scan App better, so you know if the scan was good or not.
      

Vedlegg (18)

db

dwprofile_Tix.db
320 KB

6865374225437.png
34.2 KB

6865414423581.png
48.3 KB

6865374282269.png
43.4 KB

6865374296733.png
39.8 KB

6865414557853.png
39.1 KB

6865414571805.png
35.9 KB

6865414611101.png
31.7 KB

6865374402973.png
43.6 KB

6865374469149.png
342 KB

6865374471581.png
130 KB

6865374535837.png
112 KB

6865414789533.png
42 KB

6865374579613.png
35.9 KB

6865374588189.png
47.3 KB

6865374640669.png
23.6 KB

6865374648989.png
34 KB

6865374713373.png
15.3 KB